Vascular Calculations
7-6
Editing Default Vascular Sites
To edit a specific site, follow these steps:
Press
, double-click Calculations, and highlight Vascular Sites.
SETUP
1.
Select an Exam Type from the pull-down menu (for example, Carotid).
2.
Select a calculations type (for example, %Stenosis) and double-click to open
3.
a list of vascular sites.
To change a specific site, highlight the site (for example, R ICA), and click
4.
[
].
EDIT
Use the radio buttons to adjust the settings and click [
5.
changes and return to the Vascular Sites window.
Removing Default Vascular Sites
To remove a specific site, follow these steps:
Press
, double-click Calculations, and highlight Vascular Sites.
SETUP
1.
Select an Exam Type from the pull-down menu (for example, Carotid).
2.
Select a calculations type (for example, %Stenosis) and double-click to open
3.
a list of vascular sites.
To change a specific site, highlight the site and click [
4.
Restoring Factory Defaults to Vascular Sites
To restore the factory-defined site defaults to a calculation type, follow these
steps:
Press
, double-click Calculations, and highlight Vascular Sites.
SETUP
1.
Select an Exam Type from the pull-down menu (for example, Carotid).
2.
Highlight a calculations type (for example, %Stenosis) and click [
3.
Changing the Position and Order of the Vascular Sites
To change the order in which the sites appear in the calculations site menu, fol-
low these steps:
Press
, double-click Calculations, and highlight Vascular Sites.
SETUP
1.
Select an Exam Type from the pull-down menu (for example, Carotid).
2.
Select a measurement type (for example, %Stenosis) and double-click to
3.
open a list of vascular sites.
To change the position of a specific site, highlight the site (for example,
4.
R ICA), and click the up (/\) or down (\/) arrows to move the site up or down
the list.
ACUSON Cypress™ Operator's Manual
] to save the
OK
].
REMOVE
].
RESET