Siemens ACUSON Cypress Operator's Manual page 52

3-8
Setup Menu Fields
TABLE 4.
Field
M-Mode / Doppler
Display
Angle Correction
ACUSON Cypress™ Operator's Manual
Description
Cursor Setup
Fullscreen. When this option is selected and
, or are pressed, the cursor appears on a full
PW CW
screen image. Use the Trackball to position the
2D
cursor and then press the same mode key again to
display the Time-Motion or Spectral display. Press
the mode key to switch between the full screen dis-
play with the cursor and the Time-Motion or Spec-
tral display. Press
2D
Small Sector. When this option is selected and
, or are pressed, a split screen appears with
PW CW
a small image. Use the Trackball to position the cur-
sor. Press the mode key again to display the Time-
Motion or Spectral Display. Press the mode key to
switch between the
or Spectral display. Press
Duplex Update
2D
Use the radio buttons to select the rate of update for
the image while in duplex display. Select Manual
2D
(updates occur when the Mode button is pressed), 2
Sweeps, 3 Sweeps, or 4 Sweeps.
Place a checkmark in the box to enable angle correc-
tion for all transducers.
sector (cardiac) transducers.
to exit.
image and the Time-Motion
2D
to exit.
2D
This enables angle correction on
Basic Setup
,
M
,
M