Connecting A Vcr And Video Printer - Siemens ACUSON Cypress Operator's Manual

Connecting a VCR and Video Printer

WARNING Do not use a peripheral device, such as a monitor,
within 1.5 meters of a patient unless the device receives power
from an isolation transformer that meets medical safety stan-
dards.
NOTE: To obtain the best video playback, use an SVHS recorder and SVHS
videotapes.
To connect a and Video printer to the Cypress system, follow these steps:
VCR
Make sure the Cypress system,
1.
Attach the -to-
RCA
2.
Distribution cable as shown in Figure 48 on page A-3.
Connect the -to-
RCA
3.
on the back of the
Connect the red and white cables to the two
4.
back of the (see Figure 53).
VCR
Connect the gray
5.
the (see Figure 53).
VCR
Connect the cable to the 15-pin connector on the Cypress system (see Fig-
6.
ure 53).
Connect the cable shown in Figure 52. One side connects to the
7.
connector on the
VCR
the printer (see Figure 53).
Cable Connection from VCR to Printer
FIGURE 52.
ACUSON Cypress™ Operator's Manual
, and printer are all turned
VCR
adapter to the yellow Video
BNC
adapter end of the cable to the
BNC
(see Figure 53 on page A-8).
VCR
cable to the
SVHS SVIDEO
. The other side connects to the
Connecting a SVHS VCR
VCR
OFF
plug on the Video
RCA
VIDEO IN
connectors on the
AUDIO IN
input connector on the back of
VIDEO OUT
connector on
VIDEO IN
CONNECT TO
VIDEO IN
CONNECTOR ON
BACK OF PRINTER
CONNECT TO VIDEO
OUT CONNECTOR
ON BACK OF VCR
or printer
.
connector
A-7