Viewing Saved Loops - Siemens ACUSON Cypress Operator's Manual

Scanning
5-6

Viewing Saved Loops

Saved loops can be viewed at any time during an exam by pressing the
function key. The system displays the most recently saved loop or frame. Press
any Mode key to exit View.
Viewing Saved Loops Soft Windows
TABLE 12.
Window Function/Description
Play All Plays each saved loop in a continuous rotation. When the
knob is pressed, the system plays the saved loops in the
ALL
order they were saved. Press the
Play Press the knob to switch between the two functions.
Loop/
To advance to the next loop/series, turn the knob clockwise.
Play
To return to the previous loop/series, turn the knob counter-
Series
clockwise.
Delete The Delete function is available in both the Play Loop and Play
Series modes. When
ing the
played image data. When
turning the
played series.
NOTE Deleted loops cannot be retrieved.
NOTE A study must contain at least one loop. Therefore, the
ACUSON Cypress™ Operator's Manual
PLAY LOOP
Soft Window knob deletes the currently dis-
DELETE
PLAY SERIES
Soft Window knob deletes the currently dis-
DELETE
last loop or frame in a study cannot be deleted. For
example, if a study contains three loops and you try
to delete all three, the Cypress system will allow two
loops to be deleted—but not the final loop. To delete
the remaining loop, the entire study must be removed
from the patient's file.
key to exit Play All mode.
2D
is displayed, pressing or turn-
is displayed, pressing or
VIEW
PLAY