Save The Loop And Then Assign A Label - Siemens ACUSON Cypress Operator's Manual

Stress Echo
8-22

Save the Loop and then Assign a Label

To save a loop and then assign a label, follow these steps:
Turn the
PROTOCOL
1.
label appears in yellow text in the lower left corner of the screen.
Scan the patient and, when the best images are displayed, press the •
2.
key. A camera icon appears in the upper right corner of the screen indicating
loops are being saved. Continue until loops have been saved for the four
views. To display the saved loops, press the
To return to real-time scanning, press the
When loops have been captured for the four views, press the
3.
tion key, click [
ROI
select the region of interest.
To display the loops, press
knob. While the best loop is playing, position the
Soft Window knob to display the corresponding label. Continue until all
COL
four views have been assigned labels.
Numerous loops can be assigned to each view. If you are having difficulty
deciding which loop displays the most useful diagnostic information, the
same label can be assigned to additional loops for display in the quad-
screen format. A View counter is displayed in the bottom left corner of the
screen indicating the number of loops assigned to each view.
Continue Steps 1 through 3 until all stages are completed.
4.
To start the timer, press the
5.
Note: The timer will start automatically and continue for two minutes, when
the • key is pressed during a 2-Stage Protocol immediate post exercise
SAVE
stage. The timer also may be started manually.
See "Viewing the Quad-Screen Display" on page 8-23.
6.
ACUSON Cypress™ Operator's Manual
Soft Window knob to display the first stage. The stage
]. A box appears that can be moved using the Trackball to
. To view each loop, turn the
VIEW
key, then click the [
TOOLS
function key at any time.
VIEW
mode key.
2D
TOOLS
PLAY LOOP
box. Turn the
ROI
] button.
TIMER
SAVE
func-
PROTO-