Labeling Views; Saving And Labeling Loops; Suspending The Protocol Labeling Function - Siemens ACUSON Cypress Operator's Manual

Labeling Views

Saving and Labeling Loops

The Cypress system allows you to save and label loops in three general ways:
Save the loop and then assign a label (see page 8-22).
Save and label the loop from Freeze mode (see page 8-25).
Save and label the loop simultaneously (see page 8-26).
These methods for saving loops can be used in combination during the stress
echo exam to create a method best suited to the user.
During the 2-Stage Protocol immediate post exercise stage when images must
be captured within a defined period of time, the "Save the Loop and then Assign
a Label" method is the most commonly used. Using this method lets you quickly
capture the loops and then choose the
When performing a stress echo exam, all loops should be saved with the Stage
label (Rest, Peak, etc.) assigned. A View label (
assigned to the desired loop at a later time.

Suspending the Protocol Labeling Function

To suspend the protocol labeling function, use the
knob.
To suspend labeling, follow these steps:
Start a stress echo exam.
1.
Turn the
PROTOCOL
2.
ACUSON Cypress™ Operator's Manual
and view label.
ROI
knob until labels are no longer visible.
Labeling Views
, , , ) can be
LAX SAX AP4 AP2
Soft Window
PROTOCOL
8-21