Batch Removal - Siemens ACUSON Cypress Operator's Manual

Batch Removal

To remove a group of patients or studies, follow these steps:
Press the
PATIENT
1.
To highlight a group of studies in consecutive order, use the <
2.
To highlight studies that are not in consecutive order, use the <
3.
Click the [
REMOVE
4.
A system message prompts you to specify what data should be removed by
5.
clicking the corresponding radio button: All Data (deletes all information per-
taining to the patient), All Images (deletes all loops and frames; the patient
name and patient information remain in the Patient/Study List), or Unflagged
Images (all image data not flagged will be deleted).
Click [
YES TO ALL
6.
confirm deletion of each study, one-at-a-time.
To exit, press or any Mode key except
2D
7.
ACUSON Cypress™ Operator's Manual
function key to display the Patient/Study list.
] button to delete the studies from the system hard drive.
] to remove all of the highlighted studies or click [
Using Existing Studies
SHIFT
USE THE <
KEY ON THE
CYPRESS KEYPAD
TO HIGHLIGHT MUL-
TIPLE STUDIES. THE
CYPRESS SYSTEM
WILL REMOVE ALL
THE HIGHLIGHTED
STUDIES.
USE THE <CTRL>
(CONTROL) KEY TO
HIGHLIGHT MULTI-
PLE STUDIES THAT
ARE NOT IN CON-
SECUTIVE ORDER.
THE CYPRESS WILL
REMOVE ONLY THE
HIGHLIGHTED
STUDIES.
.
COLOR
> key.
>
SHIFT
> key.
CTRL
] to
YES
4-21