Siemens ACUSON Cypress Operator's Manual page 223

The Test Result field lets you know the test result of the connection to the
9.
DICOM server. After changing or setting up the
the connection by clicking the [
tion and indicate its results in this field. Click [
nection to the server. If the ping is successful, test the
clicking the [
VERIFY
If the Ignore Server Response box is checked, the Cypress system ignores
10.
all response statuses returned by the
cate error or warning conditions that need to be addressed. If the Ignore
Server Response box is not checked and the
or warning status, a dialog box will appear
asked to either continue the transfer to the server or abort the transfer.
These response codes are server-dependent. Consult the server documen-
tation for an explanation of the codes.
Choose your Storage Commitment server using the Storage Commitment
11.
drop-down menu. If your network does not support Storage Commitment,
select None. If your
same IP Address, Application Entity Title, and Port Number that your images
are sent to, select
a separate configuration, configure the server in the Storage Commitment
Server setup page, then return to the
your Storage Commitment Server from the drop-down menu.
Click the Cypress DICOM Information subtitle in the Setup menu.
12.
Set the Application Entity.
13.
Set the Port Number.
14.
Set the PDU Length.
15.
Set the Network Timeout 1 value.
16.
Set the Network Timeout 2 value. This defines the number of seconds
17.
allowed before a time-out error is declared on an expected response. The
default time-out and minimum value is 60 seconds.
Press any mode key to return to live imaging.
18.
ACUSON Cypress™ Operator's Manual
Exporting Images from the Cypress System
] button. The system will test the connec-
PING
] button.
DICOM
server supports Storage Commitment using the
DICOM
Server. If the Storage Commitment server requires
DICOM
DICOM
server settings, test
DICOM
] to test the network con-
PING
connection by
DICOM
server. The responses can indi-
server returns an error
DICOM
on the Shutdown page.
Server setup page to select
You will be
9-9