Siemens ACUSON Cypress Operator's Manual page 286

Connecting External Devices
A-6
Connect the 15-pin connector on the cable to the 15-pin connector on the
4.
Cypress system (see Figure 51).
Connect the power cord on the
5.
Turn on the Cypress system, then the
6.
On the Cypress system, press the
7.
tab.
Use the Video Out Mode drop-down menu to select NTSC.
8.
Press to return to
SETUP
9.
Insert a video tape and press the
10.
images.
NOTE: When images are recorded on videotape, the playback on the moni-
tor will look slightly different than the display on the Cypress system—parts
of the bottom and right sides of the screen will not be shown. Nothing is
wrong with your playback. All the imaging data are displayed.
(YELLOW VIDEO
CABLE IS NOT
USED FOR SVHS
CONNECTIONS)
Connecting a
FIGURE 51.
ACUSON Cypress™ Operator's Manual
and plug it in.
VCR
VCR
SETUP
mode or press
2D
RECORD
15-PIN CONNECTOR ON CYPRESS
VIDEO
DISTRIBUTION
CABLE
SVIDEO
AUDIO
IN
VCR
.
function key to display the Setup
to begin imaging.
2D
button on the to record
VCR
VIDEO
VIDEO
IN OUT
VCR