Activate The Cw Display; Main Knob Controls Volume And Cw Gain - Siemens ACUSON Cypress Operator's Manual

Activate the
To activate the
1.
CW
2.
3.
Main Knob Controls Volume and
When you press the
They are controlled by the Main knob. Press the Main knob to toggle between
the options.
TO SWITCH
BETWEEN
VOLUME AND
GAIN, PRESS
THE MAIN KNOB
In Freeze mode, turn the Main knob to scroll through the frames.
ACUSON Cypress™ Operator's Manual
Display
CW
spectral display, follow these steps:
CW
Press the mode key once. The
CW
assigned to the cursor line.
CW
Position the cursor to the desired portion of the image, and press
ond time. This freezes the
Pressing again toggles between the active spectrum and the real-time
CW
sector image. You can also reposition the
frozen. The cursor in the
frozen.
CW
Volume Increases or decreases the amplification of the audio signal sent to
the system speaker.
Gain Turn the knob clockwise to increase the amplification of the Dop-
CW
pler signal. Turn counterclockwise to decrease.
Continuous Wave Doppler (CW) Scanning
sector is live and the Trackball is
2D
image and activates the
2D
CW
image will move but the
2D
CW
mode key two options appear—Volume and CW Gain.
spectral display.
CW
sample while the
2D
image will remain
2D
Gain
a sec-
CW
image is
5-39