Troubleshooting An Mo Disk Transfer - Siemens ACUSON Cypress Operator's Manual

Transferring Studies
9-26

Troubleshooting an MO Disk Transfer

When transferring studies to an MO disk,
Shutdown page. A red light appears in the upper right corner of the screen indicating an
Table 46 describes the possible errors and solutions.
error has occurred.
MO Disk Errors
TABLE 46.
Error
No disk in the system
The disk is write-protected
Insufficient space on the disk
for the study
A disk with an unknown format
is detected
An unformatted disk is in the
drive
An MO disk containing studies
from a source other than a
Cypress has been inserted. You
will not be able to save stud-
ies to this disk.
ACUSON Cypress™ Operator's Manual
an error message may be displayed on the
Solution
Insert a disk.
Insert a disk that is not write-pro-
tected.
Insert a disk with more available
space or delete studies from this
disk.
Format this disk or insert a properly
formatted disk.
Format this disk or insert a properly
formatted disk.
If the studies on this disk are no
longer needed, format the disk from
the utilities menu and then save the
study. Otherwise, insert a disk con-
taining only Cypress studies or a
new MO disk.