M-Mode Tools - Siemens ACUSON Cypress Operator's Manual

[ ] BUTTON
IMAGE
CONTROLS:
In Active Mode:
Transmit Power
Post Processing
Colorize
In Freeze Mode:
None

M-Mode Tools

Pressing the function key in M-Mode scanning opens a series of control
TOOLS
buttons. These buttons provide controls for secondary image functions. See
Table 25 on page 5-54 for a description of the M-Mode Tools options.
SUB-MENU FOR
POST PROCESSING
3V2c Pwr M
MI 1.0 TIs 0.1
Comp 2 PProc 3
GN 12/ /13
Harmonic
60 bpm
M-Mode Tools
FIGURE 35.
To use the Tools functions, follow these steps:
Start an M-Mode scan by pressing the
1.
Press the
TOOLS
2.
Select one of the Tools buttons:
3.
Click [ ] to open a menu of adjustable controls. This menu differs
IMAGE
depending on whether you are in Active mode or Freeze mode. Use the
Trackball to highlight the desired option and press <
sub-menu for the selected option, another window opens. Highlight the
desired option and press <
to exit the menu. To exit the menu without activating the change, highlight
Cancel and press <
Click [ ] to add text to an image in either Freeze or Active mode.
TEXT
Click [ ] to start the time counter.
TIMER
ACUSON Cypress™ Operator's Manual
IMAGE FUNCTIONS IN
ACTIVE MODE WINDOW
Curve 1
Curve 2
Curve 3
Curve 4
Cancel
Function key to display the menu of
> to activate the change. Press
ENTER
>.
ENTER
Transmit Power
Post Processing
Colorize
Cancel
mode key.
M
tools.
2D
ENTER
M-Mode Scanning
M-MODE
TOOLS
BUTTONS
Image
Text
Timer
>. If there is a
TOOLS
5-53