Save And Label The Loop Simultaneously - Siemens ACUSON Cypress Operator's Manual

Stress Echo
8-26
NOTE: Numerous loops can be assigned to each view. If you are having dif-
ficulty deciding which loop displays the most useful diagnostic infor-
mation, the same label can be assigned to additional loops for
display in the quad-screen format. A view counter is displayed on the
bottom left corner of the screen indicating the number of loops
assigned to each view.
Press the mode key to return to real-time scanning.
2D
10.
Turn the
PROTOCOL
11.
loop you want to capture.
Repeat steps 5 through 10 until all views have been assigned a loop.
12.
Press the function key at any time to display the saved loops in a full-
VIEW
13.
screen format. Press
screen format. Press
To start the timer, press the
14.
Press • to capture loops for two consecutive minutes during the Impost
SAVE
15.
or Peak stages.

Save and Label the Loop Simultaneously

To save and label the loop at the same time, follow these steps:
Press the
PATIENT
1.
Click [
NEW PATIENT].
2.
Select the stress protocol from the drop-down menu.
Press the mode key to save the information and exit the Setup screen.
2D
3.
Press the
TOOLS
4.
box.
Turn the
PROTOCOL
5.
image you want to capture (RestLAX). The view label appears in yellow text
in the lower left corner of the screen.
Scan the patient, and when the best image is displayed, position the
6.
and then press
Q SAVE
label automatically advances. The View label can be manually changed at
any time by turning the
label. Continue until all the views have been assigned to a loop.
To activate the timer, press
7.
Note: The timer will start automatically and continue for two minutes, when
the • or
SAVE Q SAVE
post exercise stage. The timer can also be started manually by clicking
[ ] and selecting Start.
TIMER
ACUSON Cypress™ Operator's Manual
knob to display the Stage and View label of the next
a second time to display the loops in a Quad-
VIEW
to exit View mode.
2D
key, then click the [
TOOLS
function key.
function key and click [
knob to display the View and Stage label of the first
. One cardiac cycle is saved and labeled. The View
knob and displaying the desired View
PROTOCOL
then click the [
TOOLS
key is pressed during a 2-Stage Protocol immediate
] button.
TIMER
] to display the region of interest
ROI
] button.
TIMER
box
ROI