Storing A User-Defined Preset; Recalling A Saved Preset - Siemens ACUSON Cypress Operator's Manual

Storing a User-Defined Preset

To save a user-defined preset, follow these steps:
Set each Cypress system function to your preferred setting.
1.
Press the key.
SETUP
2.
Highlight the Presets heading.
3.
Click [ ].
ADD
4.
Use the Trackball to place the cursor in the Presets text field and type a
5.
unique label or name for the preset. For example, "Deep Venous," "John's
Pediatric settings," "Contrast," etc.
Click [ ].
OK
6.
Click [ ].
UPDATE
7.
NOTE A maximum of 16 user-defined presets can be stored.
NOTE Changes can be made to the Presets at any time by changing
the system parameters and then clicking the [
the Setup Presets menu.

Recalling a Saved Preset

To recall a saved Preset, follow these steps:
Press the key.
SETUP
1.
Highlight the Presets heading.
2.
Use the pull-down menu to select a Preset option.
3.
Click [ ]. The Preset is loaded when live imaging begins.
LOAD
4.
NOTE If a Preset is removed (i.e., deleted) after [LOAD] is clicked and
before the start of live imaging, the factory default Preset will be
loaded.
ACUSON Cypress™ Operator's Manual
The Presets Menu
] button in
UPDATE
3-13