Command And Response Table For Sis Commands - Extron electronics HDP 101 4K User Manual

HDP 101 4K • User Guide (Continued)

Command and Response Table for SIS Commands

]
Carriage return and line feed (LF)
=
}
Carriage return with no line feed
=
|
=
Pipe (can be used interchangeably with the
• = Space
E Escape key
=
W =
Can be used interchangeably with the
X!
= Status
0 = Off/low/undetected
1 = On/high/detected
X$ EDID: 1 to 3 (see table)
=
X$
1 Input 1 (Store) Slot
2 Output
3 User Loaded Slot
Verbose mode:
X% =
0 = Clear/none
1 = Verbose mode (default)
2 = Tagged responses for queries
3 = Verbose mode and tagged responses for queries
X^ HDP 101 4K part number 60-1739-01
=
X& Text string of up to 24 alphanumeric characters and hyphen (-). No spaces allowed, and no distinction between upper and
=
lower case. First character must be a letter and the last must not be a hyphen. Default is "HDP-101-4K".
NOTE:
Upper- and lowercase characters can be used interchangeably in the command field unless otherwise specified.
}
character).
E
character.
Slot Default EDID
HDMI 1080p 60 Hz 2-Ch
Details
Default
Manually populated via PCS
5