Show Errdisable Recovery - Cisco 4500M Command Reference Manual

show errdisable recovery

show errdisable recovery
To display error disable recovery timer information, use the show errdisable recovery command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(19)EW
Examples
This example shows how to display recovery timer information for error disable:
Switch# sh ow errdisable recovery
ErrDisable Reason
-----------------
udld
bpduguard
security-violatio
channel-misconfig
vmps
pagp-flap
dtp-flap
link-flap
l2ptguard
psecure-violation
gbic-invalid
dhcp-rate-limit
unicast-flood
storm-control
arp-inspection
Timer interval:30 seconds
Interfaces that will be enabled at the next timeout:
Interface
---------
Fa7/32
Related Commands
errdisable detect
errdisable recovery
show interfaces status
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-262
show errdisable recovery
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Display includes the status of storm control.
Timer Status
--------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Errdisable reason
-----------------
arp-inspect
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Time left(sec)
--------------
13
78-16201-01