Table of Contents
Advertisement
Automation VT Drive FC322 Design Guide
For B1, B2, C1 and C2 enclosures:
•
Remove the LCP and the LCP cradle
•
Fit the MCB 10x option card into slot B
•
Connect the control cables and relieve the cable by the enclosed cable strips
•
Fit the cradle
•
Fit the LCP
A2, A3 and B3 enclosures
MG.20.X1.22 - VLT
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20783-Danfoss-131X8145-VLT-Automation-VT-Drive-VFD-FC322-460V-.5-HP.aspx
3 VLT Automation VT Drive Selection
A5, B1, B2, B4, C1, C2, C3 and C4 enclosures
®
is a registered Danfoss trademark
3
79
Advertisement
Table of Contents
