7 RS-485 Installation and Set-up
* Used to specify the index number to be used when accessing an indexed parameter.
7.8.9 How to Control VLT Automation VT Drive
This section describes codes which can be used in the function and data fields of a Modbus RTU message. For a complete description of all the message
fields please refer to the section
Modbus RTU Message Framing Structure.
7
214
MG.20.X1.22 - VLT
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20783-Danfoss-131X8145-VLT-Automation-VT-Drive-VFD-FC322-460V-.5-HP.aspx
Automation VT Drive FC322 Design Guide
®
is a registered Danfoss trademark