Table of Contents
Advertisement
3 VLT Automation VT Drive Selection
Mount the drive on the pedestal and fix it with the included bolts to the
pedestal as shown on the illustration.
3
NB!
Pedestal Kit Instruction Manual, 175R5642
Please see the
3.7.5 Input Plate Option
This section is for the field installation of input option kits available for frequency converters in all D and E frames.
Do not attempt to remove RFI filters from input plates. Damage may occur to RFI filters if they are removed from the input plate.
NB!
Where RFI filters are available, there are two different type of RFI filters depending on the input plate combination and the RFI filters
interchangeable. Field installable kits in certain cases are the same for all voltages.
380 - 480 V
Fuses
D1
All D1 power sizes
176F8442
D2
All D2 power sizes
176F8443
E1
315 kW
176F0253
355 - 450 kW
176F0254
102
MG.20.X1.22 - VLT
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20783-Danfoss-131X8145-VLT-Automation-VT-Drive-VFD-FC322-460V-.5-HP.aspx
Automation VT Drive FC322 Design Guide
Illustration 3.35: Mounting of drive to pedestal
, for further information.
Disconnect Fuses
RFI
RFI Fuses
RFI Disconnect
Fuses
176F8450
176F8444
176F8448
176F8446
176F8441
176F8445
176F8449
176F8447
176F0255
176F0257
176F0258
176F0260
176F0256
176F0257
176F0259
176F0262
®
is a registered Danfoss trademark
Advertisement
Table of Contents
