Table of Contents
Advertisement
3 VLT Automation VT Drive Selection
3.6.14 Remote Mounting Kit for LCP
The Local Control Panel can be moved to the front of a cabinet by using
the remote build in kit. The enclosure is the IP65. The fastening screws
must be tightened with a torque of max. 1 Nm.
3
Ordering no. 130B1113
Illustration 3.26: LCP Kit with graphical LCP, fasteners, 3 m cable and
gasket.
LCP Kit without LCP is also available. Ordering number: 130B1117
For IP55 units the ordering number is 130B1129.
92
MG.20.X1.22 - VLT
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20783-Danfoss-131X8145-VLT-Automation-VT-Drive-VFD-FC322-460V-.5-HP.aspx
Automation VT Drive FC322 Design Guide
Technical data
Enclosure:
IP 65 front
Max. cable length between and unit:
3 m
Communication std:
RS 485
Ordering no. 130B1114
Illustration 3.27: LCP Kit with numerical LCP, fasternes and gasket.
®
is a registered Danfoss trademark
Advertisement
Table of Contents
