Microhard Systems Nano IP Series Operating Manual page 78

6.0 Configuration
Defines how long the unit will keep awake. If set to 0, the radio will
not wakeup until data is received from the serial or ethernet port.
The Nano IP will enter
sleep mode after 60
seconds when the system
is rebooted.
Defines how long the unit will sleep. If set to 0, the radio will not
enter sleep mode.
System idle time before going into sleep mode cycle.
© Microhard Systems Inc. CONFIDENTIAL
Awake Time
Values (seconds)
0 - 65535
Sleep Time
Values (seconds)
0 - 65535
Idle Time
Values (seconds)
1 - 65535
78