6.0 Configuration
6.1.7 USB Configuration
The USB Device Port Mode allows a user to define the operation of the Nano IP's USB Port.
The port can be configured to be used as any one of the following:
Console Mode
Data Mode
Storage Mode
NDIS Mode
Windows Drivers are available from the Support Desk on the Microhard Systems Inc website.
Please register and login into:
http://www.microhardcorp.com/support, then locate the drivers in the following location:
Support Center » Downloads » Spread Spectrum » Nano IP Series » Utilities
© Microhard Systems Inc.
Provides support for the USB-to-Serial console port. In this case, Mini
USB port can be used as a USB-to-Serial console port for the text user
interface.
Provides support for the USB-to-Serial port. Mini USB port can be used as
a RS232 interface dedicated to serial data traffic.
When configured in Storage Mode the Nano IP appears as a USB Mass
Storage device to a host system and emulates a USB memory stick. It has
been formatted as MSDOS (for Windows) file system.
Provides support for sending and receiving Ethernet frames. Mini USB
port can be used as a network interface card.
CONFIDENTIAL
Image 6W: USB Configuration Menu
92
Need help?
Do you have a question about the Nano IP Series and is the answer not in the manual?