Coders And Profile Parameters - AudioCodes Mediant 800B User Manual

User's Manual
Parameter
manip-sets
[PreParsingManipulationSet
s]
Pre-Parsing Manipulation Rules Table
Pre-Parsing Manipulation
Rules
configure voip >
message pre-parsing-
manip-rules
[PreParsingManipulationRul
es]
72.9

Coders and Profile Parameters

The profile parameters are described in the table below.
Parameter
Coder Groups Table
Coder Groups
configure voip > coders-
and-profiles audio-coders-
groups
[AudioCodersGroups]
[AudioCoders]
IP Profiles Table
IP Profiles
configure voip > coders-
and-profiles ip-profile
Version 7.2
FORMAT PreParsingManipulationSets_Index =
PreParsingManipulationSets_Name;
[ \PreParsingManipulationSets ]
For more information, see Configuring Pre-parsing Manipulation Rules
on page 424.
Defines Pre-parsing Manipulation rules.
The format of the ini file table parameter is as follows:
[ PreParsingManipulationRules ]
FORMAT PreParsingManipulationRules_Index =
PreParsingManipulationRules_PreParsingManSetName,
PreParsingManipulationRules_RuleIndex,
PreParsingManipulationRules_MessageType,
PreParsingManipulationRules_Pattern,
PreParsingManipulationRules_ReplaceWith;
[ \PreParsingManipulationRules ]
For more information, see Configuring Pre-parsing Manipulation Rules
on page 424.
Table 72-35: Profile Parameters
Defines the device's coders. Each group can consist of up to 10 coders.
The first Coder Group is the default coder list and the default Coder
Group.
The format of the ini file table parameter is as follows:
[ AudioCodersGroups ]
FORMAT AudioCodersGroups_Index = AudioCodersGroups_Name;
[ \AudioCodersGroups ]
[ AudioCoders ]
FORMAT AudioCoders_Index = AudioCoders_AudioCodersGroupId,
AudioCoders_AudioCodersIndex, AudioCoders_Name,
AudioCoders_pTime, AudioCoders_rate, AudioCoders_PayloadType,
AudioCoders_Sce, AudioCoders_CoderSpecific;
[ \AudioCoders ]
Note: For a list of supported coders and for configuring Coder Groups,
see 'Configuring Coder Groups' on page 427.
Defines the IP Profiles table. The format of the ini file table parameter is
as follows:
[IPProfile]
FORMAT IpProfile_Index = IpProfile_ProfileName,
1155
72. Configuration Parameters Reference
Description
Description
Mediant 800B Gateway & E-SBC