Configuring A Guest; Procedure For A Management Level Administrator To Configure A Guest - H3C WA2612-AGN Web-Based Configuration Manual

Table 89 Configuration items
Item
Group-name
Level
VLAN
ACL
User-profile
Allow Guest
Accounts

Configuring a guest

Two types of users can configure guests: guest administrators and common users of the management
level.
NOTE:
For information about user type and authorization level, see
Procedure for a management level administrator to configure a
guest
1. Select Authentication > Users from the navigation tree.
2. Click the Guest tab to enter the guest management page.
Figure 230 Guest management page
Description
Specify a name for the user group.
Select an authorization level for the user group, which can be Visitor, Monitor,
Configure, or Management, in ascending order of priority.
Specify the VLAN to be authorized to a user in the user group after the user passes
authentication.
Specify the ACL to be used by the access device to restrict the access of a user in the
user group after the user passes authentication.
Specify the user profile for the user group.
IMPORTANT:
The AP does not support specifying a user profile.
Specify whether to allow a guest to join the user group.
IMPORTANT:
User group system is an optional group of guest accounts by default, and cannot be
modified.
235
Table 88.