Figure 394 Configuring priority trust mode
2.
Configure the priority trust mode of the interfaces as described in
3.
Click Apply.
Table 119 Configuration items
Item
Please select the interface type
Trust Mode
Description
Select the type of the ports to be configured. The interface types
available for selection depend on your device model.
Select the priority trust mode:
•
Dot1p—Uses the 802.1p priority of received packets for mapping.
•
Dscp—Uses the DSCP value of received packets for mapping.
•
Dot1 1e—Uses the 802.1 1e priority of received packets for mapping.
This option is applicable to only WLAN-BSS interfaces.
IMPORTANT:
Support for priority trust modes depends on the interface type.
366
Table
119.