H3C WA2612-AGN Web-Based Configuration Manual page 294

Item
Port Security
a. Configure mac and psk
Figure 278 mac and psk port security configuration page
Table 104 Configuration items
Item
Port Mode
Max User
MAC Authentication
Description
See Table 98.
Parameters such as authentication type and encryption type determine the port
mode. For more information, see
After you select the Cipher Suite option, the following four port security modes
are added:
•
mac and psk—MAC-based authentication must be performed on access
users first. If MAC-based authentication succeeds, an access user has to use
the pre-configured PSK to negotiate with the device. Access to the port is
allowed only after the negotiation succeeds.
•
psk—An access user must use the pre-shared key (PSK) that is
pre-configured to negotiate with the device. The access to the port is
allowed only after the negotiation succeeds.
•
userlogin-secure-ext—Perform MAC-based 802.1X authentication for
access users. In this mode, the port supports multiple 802.1X users.
Description
mac and psk—MAC-based authentication must be performed on access
users first. If MAC-based authentication succeeds, an access user has to use
the pre-configured PSK to negotiate with the device. Access to the port is
allowed only after the negotiation succeeds.
Select Wireless Service > Access Service from the navigation tree, and click
MAC Authentication List to enter the page for configuring a MAC
authentication list. On the page, enter the MAC address of the client.
Control the maximum number of users allowed to access the network through
the port.
Select MAC Authentication.
281
Table 106.