H3C WA2612-AGN Web-Based Configuration Manual page 135

Figure 124 Configure a default route
Verifying the configuration
1. Display the route table:
Enter the IPv6 route page of Switch A, Switch B, and AP respectively to verify that the newly configured
static routes are displayed as active routes on the page.
2. Ping Host B from Switch A:
<SwitchA> system-view
[SwitchA] ping ipv6 3::2
PING 3::2 : 56
Reply from 3::2
bytes=56 Sequence=1 hop limit=254
Reply from 3::2
bytes=56 Sequence=2 hop limit=254
Reply from 3::2
bytes=56 Sequence=3 hop limit=254
Reply from 3::2
bytes=56 Sequence=4 hop limit=254
Reply from 3::2
bytes=56 Sequence=5 hop limit=254
--- 3::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
data bytes, press CTRL_C to break
time = 63 ms
time = 62 ms
time = 62 ms
time = 63 ms
time = 63 ms
122