Monitor mode
•
As shown in
through scanning 802.1 1 frames and records scan results, but it does not provide WLAN services. For the
channel detection results, see
Figure 183 Monitor mode
Hybrid mode
•
When an AP operates in hybrid mode, it can both scan devices in the WLAN and act as an wireless
access point, as shown in
Figure 184 Hybrid mode
NOTE:
When an AP operates in monitor or hybrid mode, it monitors the WLAN. The administrator can monitor
the WLAN by checking the monitoring records so as to adjust the WLAN settings when the interference is
serious.
Configuring the AP operating mode
1.
Select Radio > Channel Scan from the navigation tree.
2.
Click the AP Monitor tab.
Figure
183, when AP 2 operates in monitor mode, it monitors all devices in the WLAN
"Displaying detection
Figure
184.
record."
189