H3C WA2612-AGN Web-Based Configuration Manual page 15

Table 2 Feature matrix
Module Feature
Optical Ethernet interface
Device maintenance
Device
Interface management
Wireless service Fast association
Radio
Radio
Rate
MCS index
Advanced settings Band navigation
WA2600 series
Supported on the
WA2620X-AGNP
The "File Type" and "If a file
with the same name already
exists, overwrite it without
any prompt" options in
software upgrade are
supported on the
WA2610i-GN and
WA2620i-AGN.
Configuration of IPv6
address for an interface is
supported.
The maximum Ethernet
frame length allowed by an
Ethernet interface is 1536
bytes for the
WA2610-AGN,
WA2612-AGN, and
WA2620-AGN and 1600
bytes for the other models.
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
802.11n radio mode is
supported.
Support for 802.11a/b/g
depends on your AP model.
To check whether a radio
mode is supported, see the
corresponding list on the
web page.
802.11n bandwidth mode
is supported.
Support for
802.11a/b/g/n depends
on your AP model.
If a radio mode is not
supported, it is displayed as
gray on the web page.
Up to 15.
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
2
WA3600 series
Not supported.
The "File Type" and "If a
file with the same name
already exists, overwrite it
without any prompt"
options in software
upgrade are supported.
Configuration of IPv6
address for an interface is
supported.
The maximum Ethernet
frame length allowed by
an Ethernet interface is
1600 bytes.
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.
802.11n radio mode is
supported.
Support for 802.11a/b/g
depends on your AP
model. To check whether a
radio mode is supported,
see the corresponding list
on the web page.
802.11n bandwidth
mode is supported.
802.11n radio mode is
supported.
Support for 802.11a/b/g
depends on your AP
model.
If a radio mode is not
supported, it is displayed
as gray on the web page.
Up to 23.
Supported on the APs
supporting both 2.4 GHz
and 5 GHz radios.