H3C WA2612-AGN Web-Based Configuration Manual page 295

Item
Domain
Preshared Key
b. Configure PSK
Figure 279 psk port security configuration page
Table 105 Configuration items
Item
Port Mode
Max User
Preshared Key
c. Configure userlogin-secure-ext
Perform the configurations as shown in
Description
Select an existing domain from the list.
The default domain is system. To create a domain, select Authentication >
AAA from the navigation tree, click the Domain Setup tab, and enter a new
domain name in the Domain Name field.
•
The selected domain name applies to only the current wireless service,
and all clients accessing the wireless service use this domain for
authentication, authorization, and accounting.
•
Do not delete a domain name in use. Otherwise, the clients that access
the wireless service are logged out.
•
pass-phrase—Enter a PSK in the form of a character string. You must enter
a string that can be displayed and is of 8 to 63 characters.
•
raw-key—Enter a PSK in the form of a hexadecimal number. You must
input a valid 64-bit hexadecimal number.
Description
psk—An access user must use the pre-shared key (PSK) that is pre-configured
to negotiate with the device. The access to the port is allowed only after the
negotiation succeeds.
Control the maximum number of users allowed to access the network through
the port.
•
pass-phrase—Enter a PSK in the form of a character string. You must enter
a string that can be displayed and is of 8 to 63 characters.
•
raw-key—Enter a PSK in the form of a hexadecimal number. You must
input a valid 64-bit hexadecimal number.
Configure userlogin-secure/userlogin-secure-ext.
282