Enabling Dhcp; Creating A Static Address Pool For The Dhcp Server - H3C WA2612-AGN Web-Based Configuration Manual

Step
3. Enabling the DHCP server on an interface
4. Display the information of assigned IP addresses

Enabling DHCP

1. Select Network > DHCP from the navigation tree to enter the default DHCP Server page shown
in Figure
2. Select the Enable option on the upper part of the page to enable DHCP globally.
Figure 126 DHCP configuration page

Creating a static address pool for the DHCP server

1. Select Network > DHCP from the navigation tree to enter the default DHCP Server page shown
in Figure
126.
126.
Remarks
Optional
With the DHCP server enabled on an interface, upon
receiving a client's request, the DHCP server assigns
an IP address from its address pool to the DHCP client.
With DHCP enabled, interfaces work in the DHCP
server mode.
IMPORTANT:
The DHCP server works on interfaces with IP addresses
manually configured only.
Optional
125