H3C WA2612-AGN Web-Based Configuration Manual page 375

Figure 392 Configuring a rule for a basic IPv6 ACL
3. Configure the basic IPv6 ACL rule information as described in
4. Click Add.
Table 117 Configuration items
Item
Select Access Control List
(ACL)
Rule ID
Operation
Check Fragment
Check Logging
Description
Select the basic IPv6 ACL for which you want to configure rules.
Available ACLs are basic IPv6 ACLs.
Select the Rule ID option and enter a number for the rule.
If you do not specify the rule number, the system assigns one automatically.
IMPORTANT:
If the rule number you specify already exists, the following operations modify the
configuration of the rule.
Select the operation to be performed for IPv6 packets matching the rule.
•
Permit—Allows matching packets to pass.
•
Deny—Drops matching packets.
Select this option to apply the rule to only non-first fragments.
If you do no select this option, the rule applies to all fragments and
non-fragments.
Select this option to keep a log of matching IPv6 packets.
A log entry contains the ACL rule number, action on the matching packets,
protocol that IP carries, source/destination address, source/destination port
number, and number of matching packets.
362
Table 117.