H3C WA2612-AGN Web-Based Configuration Manual page 408

By default, the QoS Service tab is displayed.
2. Click the icon for the desired radio to enter the page for configuring wireless QoS.
3. On the radio EDCA list, click the
enter the page for setting radio EDCA parameters.
Figure 420 Setting radio EDCA parameters
4. Configure the radio EDCA parameters as described in
5. Click Apply.
Table 128 Configuration items
Item
Radio
Priority type
AIFSN
TXOP Limit
ECWmin
ECWmax
No ACK
Table 129 Default radio EDCA parameters
Access category TXOP Limit
AC-BK 0
AC-BE 0
AC-VI 94
AC-VO 47
NOTE:
ECWmin cannot be greater than ECWmax.
•
On an AP operating in 802.1 1b radio mode, set the TXOP-Limit to 0, 0, 188, and 102 for AC-BK, AC-BE,
•
AC-VI, and AC-VO.
icon for the desired priority type (AC_BK, for example) to
Description
Displays the selected AP's radio.
Displays the priority type.
Arbitration inter-frame spacing number used by the AP.
Transmission opportunity limit used by the AP.
Exponent form of CWmin used by the AP.
Exponent form of CWmax used by the AP.
If you select the option before No ACK, the No ACK policy is used by the AP.
By default, the normal ACK policy is used by the AP.
AIFSN
7
3
1
1
395
Table 128.
ECWmin ECWmax
4 10
4 6
3 4
2 3