H3C WA2612-AGN Web-Based Configuration Manual page 83

Table 35 SNMPv1 or SNMPv2c configuration task list
Task
Enabling SNMP
Configuring an SNMP view
Configuring an SNMP community
Configuring SNMP trap function
Displaying SNMP packet statistics
SNMPv3 configuration task list
Perform the tasks in
Table 36 SNMPv3 configuration task list
Task
Enabling SNMP
Configuring an SNMP view
Configuring an SNMP group
Configuring an SNMP user
Configuring SNMP trap function
Displaying SNMP packet statistics
Remarks
Required
The SNMP agent function is disabled by default.
IMPORTANT:
If SNMP is disabled, all SNMP-related configurations are removed.
Optional
After creating SNMP views, you can specify an SNMP view for an
SNMP group to limit the MIB objects that can be accessed by the
SNMP group.
Required
Optional
Allows you to configure that the agent can send SNMP traps to the
NMS, and configure information about the target host of the SNMP
traps.
By default, an agent is allowed to send SNMP traps to the NMS.
Optional
Table 36 to configure SNMPv3.
Remarks
Required
The SNMP agent function is disabled by default.
IMPORTANT:
If SNMP is disabled, all SNMP-related configurations are removed.
Optional
After creating SNMP views, you can specify an SNMP view for an SNMP
group to limit the MIB objects that can be accessed by the SNMP group.
Required
After creating an SNMP group, you can add SNMP users to the group
when creating the users. Therefore, you can realize centralized
management of users in the group through the management of the group.
Required
Before creating an SNMP user, you need to create the SNMP group to
which the user belongs.
Optional
Allows you to configure that the agent can send SNMP traps to the NMS,
and configure information about the target host of the SNMP traps
By default, an agent is allowed to send SNMP traps to the NMS.
Optional
70