The IP address of the AP is 10.18.1.1. On the AP, configure the shared key for communication with
•
the RADIUS server as expert, and configure the AP to remove the domain name of a username
before sending it to the RADIUS server.
Figure 318 Network diagram
Configuring the AP
1.
Assign an IP address to the fat AP:
a.
Select Network > VLAN to create a VLAN on the fat AP.
b.
Select Device > Interface Management to assign an IP address to the VLAN interface.
2.
Configure a RADIUS scheme:
a.
Select Authentication > RADIUS from the navigation tree.
b.
Click Add.
c.
On the page that appears, add two servers in the RADIUS Server Configuration area, specify
the key expert, enter mac-auth in the Scheme Name field, select the server type Extended,
select Without domain name from the Username Format list, and click Apply.
Figure 319 Configure RADIUS
3.
Configure AAA:
a.
From the navigation tree, select Authentication > AAA.
308