Figure 118 Create an IPv4 static route
3.
Specify relevant information as described in
4.
Click Apply.
Table 54 Configuration items
Item
Destination IP Address
Mask
Preference
Next Hop
Table
54.
Description
Enter the destination host or network IP address, in dotted decimal
notation.
Enter the mask of the destination IP address.
You can enter a mask length or a mask in dotted decimal notation.
Set a preference value for the static route. The smaller the number, the
higher the preference.
For example, specifying the same preference for multiple static routes to
the same destination enables load sharing on the routes, while specifying
different preferences enables route backup.
Enter the next hop IP address, in dotted decimal notation.
116