Configuring the AP
1.
Enable dynamic DNS:
a.
Select Network > DNS from the navigation tree.
b.
Click the Dynamic tab to enter the page shown in
c.
Select the Enable option for Dynamic DNS.
d.
Click Apply.
Figure 143 Enable dynamic DNS
2.
Configure the IP address of the DNS server:
a.
In
Figure
in
Figure
b.
Enter the IP address 2.1.1.2.
c.
Click Apply.
Figure 144 Add a DNS server IP address
3.
Add a domain name suffix:
a.
In
Figure
b.
Enter the domain name suffix com as shown in
143, click Add IP to enter the page for adding a DNS server IP address, as shown
144.
143, click Add Suffix.
Figure
Figure
145.
139
143.