H3C WA2612-AGN Web-Based Configuration Manual page 77

1. Select Device > TR-069 from the navigation tree.
The TR-069 configuration page appears.
Figure 57 TR-069 configuration page
2. Configure TR-069 parameters described in
3. Click Apply.
Table 32 Configuration items
Item
TR-069
URL.
Username.
ACS
Password.
Username.
Password.
Sending
CPE
Inform.
Interval.
Account
Maintenance.
CPE Interface.
Description
Enable or disable TR-069.
TR-069 configurations can take effect only after you enable TR-069.
Configure the URL used by a CPE to initiate a connection to the ACS.
Configure the username used by a CPE to initiate a connection to the ACS.
Configure the password used by a CPE to initiate a connection to the ACS.
You can specify a username without a password that is used in the authentication.
If so, the configuration on the ACS and that on the CPE must be the same.
Configure the username used by the CPE to authenticate the connection sent from
the ACS.
Configure the password used by the CPE to authenticate the connection sent from
the ACS.
You can specify a username without a password that is used in the authentication.
If so, the configuration on the ACS and that on the CPE must be the same.
Enable or disable CPE's periodical sending of Inform messages.
Configure the interval between sending the Inform messages.
Enable or disable the CPE to inform the ACS to change the password of the account
TelecomAdmin.
Set the CPE connection interface. The CPE sends inform packets carrying the IP
address of this interface to make the ACS establish a connection with the CPE using
this IP address.
64
Table 32.