Figure 412 Adding a policy
9.
Configure classifier-behavior associations for the policy.
a.
Click the Setup tab.
b.
Select policy1. Select class1 in the Classifier Name list. Select behavior1 in the Behavior Name
list.
c.
Click Apply.
Figure 413 Configuring classifier-behavior associations for the policy
10.
Apply the QoS policy in the inbound direction of the wireless service named service1:
a.
Select QoS > Service Policy from the navigation tree.
b.
Click the
c.
Select the Inbound Policy option, and select policy1 from the following list.
d.
Click Apply.
icon for wireless service service1.
388