Figure 362 Enable the wireless service
5.
Enable 802.11n(2.4GHz) radio (By default, 802.11n(2.4GHz) radio is enabled.)
Select Radio > Radio from the navigation tree to enter the Radio page. Make sure
802.11n(2.4GHz) is enabled.
Figure 363 Enable 802.11n(2.4GHz) radio
Verifying the configuration
The client can successfully associate with the AP and access the WLAN network.
•
You can view the online clients on the page you enter by selecting Summary > Client from the
•
navigation tree.
Figure 364 View online clients
0014-6c8a-43ff is an 802.1 1g client, and 001e-c144-473a is an 802.1 1n client. In this example, client
types are not restricted. Therefore, both 802.1 1g and 802.1 1n clients can access the wireless network. If
Client 802.1 1n Only is configured, only 001e-c144-473a can access the wireless network.
336