Figure 131 Enable DHCP
2.
Enable the DHCP server on VLAN-interface 1: (This operation can be omitted because the DHCP
server is enabled on the interface by default.)
a.
Click the
b.
Select the Enable option for DHCP Server as shown in
c.
Click Apply.
Figure 132 Enable the DHCP server on VLAN-interface 1
3.
Configure a dynamic address pool for the DHCP server:
a.
Select the Dynamic option in the Address Pool field (default setting) and click Add to enter the
page as shown in
b.
To configure a dynamic address pool for the DHCP server:
−
Enter test for IP Pool Name.
Enter 10.1.1.0 for IP Address.
−
Enter 255.255.255.0 for Mask.
−
Enter 10 days 12 hours 0 minutes 0 seconds for Lease Duration.
−
icon of VLAN-interface 1 in the Interface Configuration field.
Figure
133.
131
Figure
132.