Figure 63 Create an SNMP view (1)
4.
Enter the view name.
5.
Click Apply.
The page in
Figure 64
Figure 64 Create an SNMP view (2)
6.
Configure the parameters as described in
7.
Click Add.
8.
Repeat steps 6 and 7 to add more rules for the SNMP view.
9.
Click Apply.
To cancel the view, click Cancel.
Table 38 Configuration items
Item
View Name
Rule
MIB Subtree OID
Subtree Mask
appears.
Table
Description
Set the SNMP view name.
Select to exclude or include the objects in the view range determined by the MIB
subtree OID and subtree mask.
Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as system).
MIB subtree OID identifies the position of a node in the MIB tree, and it can uniquely
identify a MIB subtree.
Set the subtree mask.
If no subtree mask is specified, the default subtree mask (all Fs) will be used for
mask-OID matching.
73
38.