H3C WA2612-AGN Web-Based Configuration Manual page 249

3. Click Add to enter the guest configuration page.
Figure 231 Guest configuration page
4. Configure a single guest or a batch of guests as described in
5. Click Apply.
Table 90 Configuration items
Item
Create Users in a
Batch
Username
Username Prefix
Number of Users
Password
Same as the
Username
Confirm
Group
ValidTime
Description
Specify whether to create guests in a batch.
Specify a name for the guest when users are not created in a batch.
Specify the username prefix and number for guests to be created in a batch.
For example, if you specify the username prefix as abc and number as 50, 50 guests
will be created, with the usernames abc0 through abc49.
Specify a password for the guest.
If you select the Same as the Username option, you do not need to enter the password
and confirm password, and the guest password is the same as the username.
If you do not select the Same as the Username option, you must enter the password and
confirm password, and they must be the same.
IMPORTANT:
Leading spaces of a password are ignored.
Select a user group for the guest.
For information about user group configuration, see
Specify a valid time range for the guest, including the start time and end time.
When authenticating a local user with the valid time argument configured, the access
device checks whether the valid time has elapsed. If not, the device permits the user to
log in.
236
Table 90.
"Configuring a user group."