Configuring Uplink Interface Monitoring; Configuring A Channel Busy Test - H3C WA2612-AGN Web-Based Configuration Manual

Configuring uplink interface monitoring

1. Select Advanced > Uplink Monitor from the navigation tree.
Figure 449 Configuring uplink interface monitoring
2. Configure uplink interface monitoring as described in
Table 138 Configuration items
Item
Interface Name
Status
Uplink
NOTE:
If no uplink interfaces are up, the AP does not provide WLAN services.

Configuring a channel busy test

1. Select Advanced > Channel Busy Test from the navigation tree.
Figure 450 Configuring channel busy test
2. Click the
Description
Display the interfaces that can be configured as uplink interfaces.
•
Up—The interface is up.
•
Down—The interface is down.
The uplink status of a radio is the status of the WDS link bound to the radio.
Select the box to configure the interface as an uplink interface. The radio interface
with WLAN distribution system (WDS) enabled can be selected as an uplink
interface.
For more information about uplink interface monitoring, see
monitoring."
For more information about WDS, see "Wireless service."
icon corresponding to the target AP to enter channel busy testing page.
Table
416
138.
"Uplink interface