2.
Select the Static option in the Address Pool field to view all static address pools.
3.
Click Add to enter the page shown in
Figure 127 Create a static address pool
4.
Configure the static address pool as described in
5.
Click Apply.
Table 57 Configuration items
Item
IP Pool Name
IP Address
Mask
Client MAC Address
Client ID
Client Domain Name
Figure
Description
Enter the name of a static address pool.
Enter an IP address and select a subnet mask for the static address pool.
The IP address cannot be the IP address of any interface on the DHCP server.
Otherwise, an IP address conflict may occur and the bound client cannot obtain an
IP address correctly.
You can enter a mask length or a mask in dotted decimal notation..
Configure the client MAC address or the client ID for the static address pool.
IMPORTANT:
The client ID must be identical to the ID of the client to be bound. Otherwise, the client
cannot obtain an IP address..
Enter the domain name suffix for the client.
With the suffix assigned, the client only needs to enter part of a domain name, and
the system adds the domain name suffix for name resolution.
126
127.
Table
57.