Figure 462 Displaying statistics
Configuring the blacklist and white list functions
Configuring dynamic blacklist
1.
Select Security > Filter from the navigation tree.
You will enter the Blacklist tab.
Figure 463 Configuring dynamic blacklist
2.
Configure the dynamic blacklist as described in
Click Apply.
3.
Table 144 Configuration items
Item
Dynamic Blacklist
Lifetime
Description
•
Enable—Enable dynamic blacklist.
•
Disable—Disable dynamic blacklist.
IMPORTANT:
Before you enable the dynamic blacklist function, you must select the Flood Attack
Detect box in the WIDS Setup page.
Configure the lifetime of the entries in the blacklist. When the lifetime of an entry
expires, the entry is removed from the blacklist.
428
Table
144.