H3C WA2612-AGN Web-Based Configuration Manual page 150

dynamic domain name resolution. The IP address of the DNS server is 2.1.1.2/16 and the DNS server has
a com domain, which stores the mapping between domain name host and IP address 3.1.1.1/16.
Configure dynamic domain name resolution and the domain name suffix com on the AP that serves as
a DNS client so that the AP can use domain name host to access the host with the domain name host.com
and the IP address 3.1.1.1/16.
Figure 139 Network diagram
Client
NOTE:
Before performing the following configuration, make sure that the AP and the host are accessible to each
•
another via available routes, and the IP addresses of the interfaces are configured as shown
This configuration may vary with DNS servers. The following configuration is performed on a PC
•
running Windows server 2000.
Configuring the DNS server
1. Create zone com:
a. Select Start > Programs > Administrative Tools > DNS.
b. As shown in
c. Follow the instructions to create a new zone named com.
Figure 140 Create a zone
2. Create a mapping between host name and IP address:
DNS server
2.1.1.2/16
Vlan-int1
2.1.1.1/16
AP
DNS client
Figure 140, right click Forward Lookup Zones and select New Zone.
IP network
137
Host
3.1.1.1/16
host.com
Figure 139.