H3C WA2612-AGN Web-Based Configuration Manual page 263

Figure 247 Network diagram
Configuring the CA server
1. Create a CA server named myca.
In this example, you must first configure the basic attributes of Nickname and Subject DN on the
CA server: the nickname is the name of the trusted CA, and the subject DN is the DN attributes of
the CA, including the common name (CN), organization unit (OU), organization (O), and country
(C). Leave the default values of the other attributes.
2. Configure extended attributes.
After you configure the basic attributes, perform configuration on the Jurisdiction Configuration
page of the CA server. This includes selecting the proper extension profiles, enabling the SCEP
autovetting function, and adding the IP address list for SCEP autovetting.
3. Configure the CRL publishing behavior.
After you complete the configuration, perform CRL related configurations.
In this example, select the local CRL publishing mode of HTTP and set the HTTP URL to
http://4.4.4.133:447/myca.crl.
After the configuration, make sure that the system clock of the AP is synchronous to that of the CA,
so that the AP can request certificates and retrieve CRLs properly.
Configuring AP
1. Create a PKI entity.
a. Select Authentication > Certificate Management from the navigation tree.
b. Click Add on the page.
c. Enter aaa as the PKI entity name
d. Enter ap as the common name.
e. Click Apply.
250