The models listed in this document are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
Support of the H3C WA series WLAN access points (APs) for features may vary by AP model. For
more information, see Feature Matrix.
The interface types and the number of interfaces vary by AP model.
The term AP in this document refers to common APs, wireless bridges, or mesh APs.
4
WLAN Interface Configuration
This chapter includes these sections:
Overview
WLAN-Radio Interface
WLAN-BSS Interface
WLAN Mesh Interface
WLAN Mesh Link Interface
Displaying and Maintaining a WLAN Interface
Overview
FAT APs support WLAN-Radio physical interfaces and WLAN-BSS virtual interfaces. WLAN-Radio
interfaces can be bound to WLAN-BSS interfaces to provide wireless network access.
WLAN-Radio Interface
Introduction
WLAN-Radio interfaces are physical interfaces and are used for providing wireless access service.
They can be configured but cannot be removed.
Configuring a WLAN-Radio Interface
Follow these steps to configure a WLAN-Radio interface:
To do...
Enter system view
Enter WLAN-Radio interface view
Use the Command...
system-view
interface wlan-radio
interface-number
4-1
Remarks
—
Required