H3C WA2612-AGN Web-Based Configuration Manual page 428

Figure 446 Configuring continuous transmitting mode
2. Click the icon corresponding to the target radio to enter the page for configuring transmission
rate.
The transmission rate varies with radio mode.
When the radio mode is 802.1 1a/b/g, the page as shown in
transmission rate from the list.
Figure 447 Selecting a transmission rate (802.11b/g)
When the radio mode is 802.1 1n, the page as shown in
index value to specify the 802.1 1n transmission rate. For more information about MCS, see
"Radio configuration."
Figure 448 Selecting an MCS index (802.11n)
3. Click Apply.
To stop the continuous transmitting mode, use either of the methods:
Click the icon corresponding to the target radio.
•
• Select the target radio, and click Stop.
After the continuous transmit is stopped, the transmission rate value on the page as shown in
is displayed as 0.
Figure 448
415
Figure 447 appears. Select a
appears. Select an MCS
Figure 446